「standards」の検索結果

Knowledge base from FAA-HDBK-006D (2020), the FAA's System Reliability, Maintainability, and Availability (RMA) Handbook for National Airspace System (NAS) hardware and software. Use for RMA figures of merit (MTBF, MTBO, MTTR, the availability variants), the bathtub curve and probability distributions, the four-stage RMA lifecycle mapped to the FAA Acquisition Management System (AMS), the six-task RMA technical-management/acquisition process, service-thread criticality and the NAS-RD severity-to-target table, the RMA analysis toolbox (RBD, FMEA/FMECA, FTA, Ishikawa, Monte Carlo, Bayesian, FRACAS, ALT, reliability-growth/recovery tests), software reliability (early prediction + reliability growth), and tailorable example RMA requirements for a Program Requirements Document. Scope limits: it is FAA/NAS-specific guidance (not a requirement, by its own statement), centred on hardware-plus-software availability — it brackets out human/service/facility/communications availability, names but does not reproduce the math derivations or external standards (MIL-STDs, IEEE 1633, RTCA DO-178C/DO-278A, SAE JA1011), is thin on detailed worked numerical examples and on safety-case method, and predates any current revision beyond 006D.

日本語の概要は準備中です。原文の説明を表示しています。

Signpost (not a knowledge pack) for the automotive standards landscape: ISO 26262, ASPICE, SAE J3016, UNECE R155, UNECE R156, and the NHTSA vehicle set. Contains NO source content: designation, edition, owner, status, and an official catalogue URL only. Use when you need to identify or locate an automotive standard. Most are paywalled or carry no redistribution grant and cannot be packaged; the one open path is the nhtsa-vehicle pack.

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from FAA-STD-025f (Preparation of Interface Documentation). Use for IRD/ICD family definitions, common format and content, IRD shall-requirements, ICD design characteristics, verification/VRTM, and CM/revision/approval of FAA Enterprise Subsystem interfaces. Covers rev F preparation rules only; does not replace FAA-STD-005 drawing/spec prep, Order 1800.66 full CM procedures, or non-FAA interface standards.

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from the NASA Digital Engineering Acquisition Framework Handbook (NASA-HDBK-1004). Use for acquiring digital/model-based data under contract: the Data Requirements Description (DRD) instrument and the Appendix A DRD suite (TDP, MBx, CDMP, CSA, CR, FCA/PCA, SDT, EMDAL, REF, MRI); the Data Type 1-5 control scale; SOW/RFP/Cost-Volume contract language and data rights (FAR/DFARS, Table 3 license categories); the Requirements Exchange Format (REF/ReqIF, UUID schema) and Master Records Index; model-based data definition (MBSE, CAD/PMI, M&S credibility, BOM, release-state mapping, PLM); digital data collaboration, the four owned architectures, and interoperability standards (MIL-STD-31000, STEP/ISO 10303, ASME Y14); the four MBE interoperability use cases; and MBE Plan development. Scope is the acquisition and contracting side of digital engineering. Does not reproduce ISO/STEP/ASME/MIL-STD/SAE standard text, and the companion NASA-HDBK-1009A carries the deeper digital-engineering practitioner detail this handbook defers to.

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from NASA Human Systems Integration (HSI) Practitioner's Guide (NASA/SP-2015-3709). Use for HSI process implementation, lifecycle phase activities, function allocation, ConOps development, HSI Plan writing, HSI metrics (MOE/MOP/TPM/KPP), HITL testing strategy, HSI team organisation, scaling/tailoring for program size, and V&V planning. Does not cover the specific human engineering design standards (NASA-STD-3001 content) or detailed HFE methods beyond what the guide itself provides.

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from DOE Systems Engineering Methodology (SEM) Version 3 — the DOE SDLC for IT investments. Use for staged systems lifecycle planning through maintenance, Stage Exits, Structured Walkthroughs, In-Stage Assessments, requirements traceability, and CMM-aligned process discipline. Covers SEM3 (2002) guidance only; does not replace modern DevSecOps tooling standards, DOE O 413.3B capital-asset directives, or current CIO policy supersessions.

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from NASA NPR 7123.1D — Systems Engineering Processes and Requirements. Use for the 17 common SE processes (SE Engine), life-cycle reviews and entrance/success criteria, SEMP structure and content, ETA roles and tailoring/customizing rules, Technology Readiness Levels (TRL 1–9), SE work product maturity terminology, contracted project oversight, and MOE/MOP/TPM measurement frameworks. Does not cover NASA programme financial management, human spaceflight medical standards, or software engineering requirements in depth (see NPR 7150.2 for the latter).

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from MIL-HDBK-338B (Electronic Reliability Design Handbook). Use for electronic reliability engineering: R/M/A theory, reliability specification/allocation/prediction, parts management and derating, reliable circuit and fault-tolerant design, environmental and human performance reliability, FMEA/FMECA/FTA/sneak circuit analysis, design reviews and testability, FRACAS, reliability demonstration and growth testing, and systems-level R&M parameters. Covers selected Part 2 design-guidance topics only; skips large annex/part-stress tables. Guidance handbook — not a contractual requirement text. Does not replace MIL-HDBK-217 prediction libraries, service-specific reliability regs, or safety standards (see mil-std-882).

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from DoD Architecture Framework (DoDAF) 2.02 — Volume II: Architectural Data and Models. Use for DoDAF viewpoints, DM2 meta-model, capability modeling, operational architecture, systems architecture, services architecture, data/information modeling, standards compliance, project/portfolio integration, and fit-for-purpose model selection. Does not cover DoDAF Volume I (policy/governance) or Volume III (enterprise-level guidance); also does not substitute for the live DISR or DARS registries.

日本語の概要は準備中です。原文の説明を表示しています。

Signpost (not a knowledge pack) for the functional safety standards landscape: IEC 61508, ISO 26262, ISO/SAE 21434, UL 4600, SAE J3016, and ASPICE. Contains NO source content: designation, edition, owner, status, and an official catalogue URL only. Use when you need to identify or locate a functional safety standard. All six are paywalled or carry no redistribution grant and cannot be packaged; open paths point at US Government packs, which are not equivalents.

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from the DOE Order on Program and Project Management for the Acquisition of Capital Assets (DOE O 413.3 series). Use for Critical Decisions CD-0–CD-4, performance baselines, acquisition strategy and IPTs, cost/schedule/EVMS/PARS controls, risk-informed governance, reviews, and contractor requirements. Built from O 413.3C (2026-08-05), which cancels O 413.3B Chg 7 (2023-06-21); does not replace site-specific procedures, nuclear safety rules detail, or full estimating standards.

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from the FAA Requirements Engineering Management Handbook (DOT/FAA/AR-08/32). Use for writing requirements for real-time, embedded control systems — the avionics/medical slant — via the Handbook's eleven recommended practices: system overview and boundary (monitored/controlled variables), operational concepts (use cases), environmental assumptions, change-tolerant functional architecture (dependency diagrams), safety-driven architecture revision (FHA/PSSA/fault tree), system modes, detailed behavior and performance requirements (ideal value + tolerance + latency), the four-variable model bridge to software requirements (MON/CON/NAT/REQ, IN'/REQ'/OUT', DO-178B mapping), subsystem allocation, and rationale. Carries the Isolette Thermostat and Flight Control System worked examples. Slanted toward control systems with sensors and actuators; thin on information-system / enterprise / agile requirements, on requirements-management tooling, and on the formal-methods internals of SCR/RSML/SpecTRM (it names them, does not re-teach them). Does not reproduce the IEEE/DO-178B/ARP standards it cites.

日本語の概要は準備中です。原文の説明を表示しています。

Knowledge base from the GAO Cost Estimating and Assessment Guide (GAO-20-195G). Use for program cost estimating: the four characteristics of a reliable estimate (comprehensive, well documented, accurate, credible) and the 18 best practices; the 12-step cost estimating process (purpose, plan, technical baseline, WBS, ground rules and assumptions, data, point estimate, sensitivity, risk/uncertainty, document, present, update); estimating methods (analogy, parametric, engineering build-up, learning curves); Monte Carlo risk/uncertainty analysis, confidence levels and contingency; auditing and validating an estimate against the characteristics; earned value management (EIA-748, BCWS/BCWP/ACWP, CPI/SPI/TCPI, EAC, PMB, IBR); and specialized techniques (software cost estimating, learning curves, Analysis of Alternatives, WBS templates, the Green Book internal-control framework). This is the cost-estimating companion to the GAO Schedule and Technology Readiness Assessment guides. Does not cover schedule estimating/risk in depth (see the GAO Schedule Assessment Guide), agency-specific cost models, or the full text of referenced standards (EIA-748, MIL-STD-881D, the Green Book) — these are named, not reproduced.

日本語の概要は準備中です。原文の説明を表示しています。

Structured 6-step procedure for improving, renovating, or rebuilding existing pipelines, individual project folders, documentation structures, or software stacks. Addressable as "pipeline optimizer" (for whole topic pipelines, e.g. a software, research, or game-dev pipeline) or "project-folder optimizer" (for individual project folders within a pipeline, e.g. a single software tool or paper project). Triggers on tasks like "improve pipeline X", "optimize the stack", "rebuild Y", "renovation", "pipeline refactoring", "clean up project folder", "improve folder structure", "unify conventions", "documentation consolidation", "integrate into existing system", or any substantial intervention in established structures. Delivers building-stock analysis, purpose clarification, ideal sketch, gap plan, empirical pain-point identification, and retests with fresh subagents. Prevents parallel standards, duplication, and pipeline breaks.

日本語の概要は準備中です。原文の説明を表示しています。

Proposes the piping content a P&ID adds to an accepted PFD process model: line inventory with off-page continuity and required ancillary lines, line identification elements per the project line numbering procedure, connection items at nozzles matched to a quoted schedule, per quoted standards, specification break questions and observations. Every proposal cites its source and revision; no source, no proposal; never sizes a line or selects a class. Use when the user asks to "run the piping enrichment", "start the discipline enrichment", "list the lines the P&ID adds to this PFD" or "fill the line identifiers from the numbering procedure" after gate G2. Do not use for instruments, loops or instrument tags, use instrumentation-and-control-enrichment instead; do not use before gate G2, use process-model-check. Drafts for human review; never approves, authorises or signs off.

日本語の概要は準備中です。原文の説明を表示しています。

Per-toolkit hardening audit loop for NV oOS Pro tools. Systematically scans each addons/pro/includes/tools/<toolkit> (and its plugins/nvoos-content-graph-pro mirror) for the four recurring production failure classes — unguarded shell calls that fatal on exec-disabled hosts, calls to nonexistent client methods, string-assuming parsing of provider responses that may be arrays, and provider enum/service mismatches — then fixes, tests (Docker PHPUnit), and validates (phpcs both standards) before moving to the next toolkit. Use when asked to audit a toolkit, review the X tools for similar issues, do the same for the other toolkits, or continue the toolkit audit loop. The first case study (document-generation) found 3 fatal bugs + 1 broken regex.

日本語の概要は準備中です。原文の説明を表示しています。

Operational guide for WordPress.org submission readiness of NV oOS standalone plugins (nvoos-docs-hub live at 0.5.3; nvoos-content-graph live at 1.0.10 in the re-submission loop; nvoos-design-system next in the pipeline — issue #6811). Covers the 18 wp.org guidelines, the Plugin Check (PCP) gate in CI and Docker, PCP finding triage, the reviewer-reply loop (findings taxonomy from the real 0.4.3 review, related-issue sweep checklist, reply-email template), packaging exclusion tri-sync, readme.txt standards, .wordpress-org listing assets, and the NV oOS Complete checkout-flow disclosure discipline (docs-hub 0.5.3, content-graph). Use when preparing a wp.org submission, responding to a reviewer email, fixing the plugin-check CI job, triaging PCP findings, or capturing listing screenshots.

日本語の概要は準備中です。原文の説明を表示しています。

Applies Anthropic's official brand colors and typography to any sort of artifact that may benefit from having Anthropic's look-and-feel. Use it when brand colors or style guidelines, visual formatting, or company design standards apply.

日本語の概要は準備中です。原文の説明を表示しています。

適切なメタデータ処理、ミント戦略、マーケットプレイス統合を備えたNFT標準(ERC-721、ERC-1155)を実装します。NFTコントラクトを作成する時、NFTマーケットプレイスを構築する時、またはデジタル資産システムを実装する時に使用してください。

Implement Kubernetes security policies including NetworkPolicy, PodSecurityPolicy, and RBAC for production-grade security. Use when securing Kubernetes clusters, implementing network isolation, or enforcing pod security standards.

日本語の概要は準備中です。原文の説明を表示しています。

Create production-ready Kubernetes manifests for Deployments, Services, ConfigMaps, and Secrets following best practices and security standards. Use when generating Kubernetes YAML manifests, creating K8s resources, or implementing production-grade Kubernetes configurations.

日本語の概要は準備中です。原文の説明を表示しています。

Master REST and GraphQL API design principles to build intuitive, scalable, and maintainable APIs that delight developers. Use when designing new APIs, reviewing API specifications, or establishing API design standards.

日本語の概要は準備中です。原文の説明を表示しています。

Master end-to-end testing with Playwright and Cypress to build reliable test suites that catch bugs, improve confidence, and enable fast deployment. Use when implementing E2E tests, debugging flaky tests, or establishing testing standards.

日本語の概要は準備中です。原文の説明を表示しています。

Master effective code review practices to provide constructive feedback, catch bugs early, and foster knowledge sharing while maintaining team morale. Use when reviewing pull requests, establishing review standards, or mentoring developers.

日本語の概要は準備中です。原文の説明を表示しています。